- Product Information
- Technical Descriptions
- Charging cable of the highest quality- epoxy filled plug and fireproof cable
- Protective cover on each plug- prevents dirt and dust during storage
- Ergonomic rubber handles- comfortable and provides a better grip during use
- Quality components make the charging cable soft and usable, even in sub-zero temperatures
Charging cables from Jazzy2Go™ are exclusively designed and developed for electric vehicles and combine ease of use, functionality and durability. This is a mode 3 charging cable type 2 (IEC-62196) to type 1 (SAE J1772) for charging electric cars and plug-in hybrids (PHEV) with up to 32A (7.4kW/1-phase). It fits electric cars with a type 2 charging contact (e.g. Hyundai IONIQ Opel Ampera-e and Chevrolet Bolt EV) and fits charging stations with type 2 outlet/plug.
Molded and Epoxy-Filled Plugs
Epoxy creates a solid mass that fills the entire plug and spreads warmth evenly, thus avoiding overheating of the charging contact. Fully molded plugs seal and protect the conductors and improve water resistance.
Resistant to Cable Breaks
Extra long cable strain reliefs protect the conductors from breaking where the cable enters the plug, increasing the product's lifespan.
Robust and Flexible Cable
Internal cable routing is padded to fill free space inside the cable, reducing stress during bending and twisting of the cable. Optimal thickness of the insulation provides longer durability, increased security and maximum flexibility.
Significantly more stable than standard "axial" resistance which is more prone to breakage due to external influences or falling from heights.
The charging cable is delivered in a specially designed storage bag, keeping it clean and safe while in storage. On the back of the bag there is a removable Velcro system that allows the bag to be attached to either the floor or the luggage compartment wall of your trunk- so it stays in place while in motion.
To reduce dirt and grime from getting into your car, the Jazzy2Go™ comes with a pair of microfiber mitts so you can easily wipe down the charging cable if it gets dirty/wet.
Charging cables from Jazzy2Go™ use quality components and cables (TPE/PUR) that have been tested in different climates. This means that the charging cable is easy to wind up after use as it remains soft and usable in sub-zero temperatures.
Jazzy2Go™ has been developed with a long life span in mind. The cable relief from the end of the plug is extra long- preventing damage/breakage of the charging cable. That is why the plug(s) are completely cast in fireproof material, and filled with heat-dispersing epoxy that conducts away heat and protects the conductors. Ergonomic rubberized handles ensure a good grip when using the cable.
Cables from Jazzy2Go™ are supplied with solid protective covers for each plug that protect against dirt, dust and moisture during storage.
The charging cable is secured against theft by supporting auto lock, and it will also lock to the charging station during charging if the charging point supports this. Drainage holes in the bottom of the plug eliminates freezing in the socket.
The cable is tested according to IEC 62335 and is, therefore, very robust and can withstand being run over by a car. All charging cables from Jazzy2Go™ comply with all regulations and are CE and TÜV-certified.
The contents packed with the Jazzy2Go™ include:
- Jazzy2Go™ charging cable
- Special designed storage bag
- 2 pc microfiber mitts
Suitable for, among other things, electric cars and plug-in hybrids such as:
- Opel Ampera-e
- Chevrolet Bolt EV
- Hyundai KONA
- Hyundai IONIQ
- Nissan LEAF 2.gen (2018)
- Volvo C30 Electric II
Use ladeguiden (our charging guide) if you are unsure if this product suits your plug-in hybrid or electric car.
|5 / 8 / 10 meters
|Number of Phases
|32A (up to 7,4kW)
|Light brown-beige with white stripes- plug in light brown-beige
|>10 000 charging cycles
|Type 2 / male (IEC-62196)
|Type 2 / female (IEC-62196)
|-25°C - 105°C
|IP44 (when it is connected to the car)
|4 kgs (5m) and 4,5 kgs (8m)
|CE, TÜV, IEC 62196-1 and IEC62196-2
Questions and Answers
Is there a difference between the brands of mode 3 charging cables?
Yes, there are significant differences and you can find a comparison here (her).
Do I need a type 2 to type 2 cable?
The need depends on your usage pattern and whether you live around places that have installed charging points with a type 2 outlet. There are beginning to be more of these in Oslo because it provides increased security. At the same time, there is a lot of wear and tear, increased maintenance and more use of the schuko contact. Thus it is only a matter of time before the majority of charging points in the capital consist of type 2 connectors. If you have both this cable and mode 2 charging cable (e.g. the supplied charging cable) in the car, you can charge your car in most places.
How do I use the type 2 to type 2 charging cable?
The video for the Oslo City Environment Agency shows how to use these new charging stations.
Which amperage of the charging cable should I choose? 32A or 16A?
Generally speaking, we would recommend a 32A charging cable as this is more forward-looking if you choose to change your electric car or plug-in hybrid at a later time.
Will a 32A charging cable work with 16A charging stations and cars with a maximum 16A charger in the car?
Yes, it is backwards compatible and a 32A charging cable will work with 16A charging stations. Cars with maximum 16A on-board charger will also work with a 32A charging cable, but will only charge with maximum 16A.
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.