Out stock

LadeTrafo — Complete Charging Solution for Renault ZOE — 3,7 kW — 16A/1-phase — Type 2

SKU: 3-180-000009

AVAILABILITY: Out of Stock

VENDOR: Noratel

24.400 kr
19.520 kr eks. mva.
STORE AND PICK-UP POINT
Gladengveien 18, 0661 Oslo
FAST DELIVERY
1-3 Working days by post

Note! Can only be installed by a registered installation company.
Only 1.000 kr away from free shipping

Product Information


  • Specially designed for Renault ZOE on the Norwegian IT-power grid
  • Complete charging solution produced and developed in Norway - isolation transformer and charging in one
  • Space-saving and easy installation- can be easily mounted on the wall
  • Built-in DC-RCM 6mA - Does not need ground fault protection type B

Noratel logo - Elbilgrossisten


Type 2 Mode 3 1-fas 230V 16A 3,7kW effekt 5 / 10 meter kabellengde DC-RCM modul 6mA

 

A complete charging solution to be able to charge the Renault ZOE on a standard Norwegian IT power grid. The Renault ZOE has a charger that has problems charging on the Norwegian IT network. The Noratel LadeTrafo combines a specially designed isolation transformer with a type 2 charging box/ charging station and a 5 meter charging cable with a type 2 plug.

The charging transformer supports a continuous load of 3.7 kW and creates a galvanic separation between the E-works' power grid (primary winding) and outgoing course (secondary winding). Thus, one of the phases can be earthed so that you get an N conductor and the car perceives the load in the secondary network as a local TN-S power network.

The charging transformer, LadeTrafo, is well suited in situations where earth faults can cause problems with charging electric vehicles as it creates a galvanic separation (new local power grid).

Practical and Easier Installation

The LadeTrafo is based on the Noratel low-loss transformer which has had low idle losses and suppresses the starting current so that the connection to normal residual courses is possible without problems with the fuses blowing out.  The recommended protection is therefore a 16A combi-automatic switch Type A, C- characteristic.

The LadeTrafo is small and therefore space-saving and can easily be mounted on a wall, which simplifies installation and lowers installation costs.

Earth Fault Circuit Breaker
New regulations (NEK 400:2018-722 standard) require that all new current courses to be used to charge electric vehicles must have an earth fault protection/ earth fault circuit breaker Type B. The charging station has built-in earth fault protection for AC (30mA) and DC-RCM module (6mA) which takes care of the DC-protection (according to IEC61851) and means that you do not need earth fault protection type B installed in the fuse box. 

Assembly/ Installation

After receiving your charging station from us, you can easily install it by contacting one of our installation partners or your local electrician. By agreement, our partners will visit you for an inspection and will provide a price quote for installation that is right for your particular case.

 



 

The charging station fits, among other things, electric vehicles and plug-in hybrids:


According to regulations on electrical equipment §21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by an authorized and registered installation company installasjonsvirksomhet.

Use ladeguiden (our charging guide) if you are unsure if this product suits your plug-in hybrid or electric car.

 


Technical Details


Charging Outlet/ Plug
Type 2 plug
Length of Cable
5 meters
Number of Phases
1
Power Supply (AC)
16A / 230V IT-NETT
Exit (AC) 16A / 230V TN-S net
Charging Effect
3,7 kW
Operating Voltage
1-phase 230V / 230V
Earth Fault Protection
AC 30mA and DC-RCM 6mA
Authorization None
Color
Black
Insulation Voltage
2,5 kV AC RMS
Charging Standards IEC 61851-1,  EN61558-2-4
Operating Temperature -20°C - 40°C
Measurements L 420 mm x W 541 mm x H 180mm
Weight 40 kg
Security/ Protection Class IP44
Installation Simple and quick installation. Pre-wired cables
Certifications
CE
Warranty
2 years

 

Questions and Answers


Does LadeTrafo support 230V / 3-phase mains (IT)?
Yes, it can be connected to 230V/3-phase IT mains.

 

Installation and user manual is found below:

Usermanual Bruksmanual kommer - Norwegian Language

 

 


Warranty


We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods.  Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
LadeTrafo — Complete Charging Solution for Renault ZOE — 3,7 kW — 16A/1-phase — Type 2

LadeTrafo — Complete Charging Solution for Renault ZOE — 3,7 kW — 16A/1-phase — Type 2

24.400 kr