Out stock

NexBlue ZEN — Dynamic load control / balancing of main fuse

SKU: CS3ANA-3

AVAILABILITY: In stock

VENDOR: NexBlue

1.995 kr
1.596 kr eks. mva.
STORE AND PICK-UP POINT
Gladengveien 18, 0661 Oslo
FAST DELIVERY
1–3 Working days by post

Note! Can only be installed by a registered installation company.

Only 1.000 kr away from free shipping

Product information



  • NexBlue ZEN provides automatic dynamic load balancing of the main fuse to the NexBlue Edge(s)
  • Charge with up to 32A when power consumption is low in the home
  • Adjust the charging of your electric car(s) according to the power tariff
  • Communicates with charging station(s) via Nexus radio frequency, WiFi or LAN
  • Easily attaches to the fuse box on an existing DIN rail (3-module) - Applies only to the CT terminals
  • Monitor your home/building's electricity consumption through the NexBlue App
  • 3 variants: CT terminals, HAN and P1 plug

400V230V3-phase1-phaseEasee Equalizer - Smart House - ElbilgrossistenHAN plug - AMS meter - ElbilgrossistenP1 Plug iconCT clamps iconLAN port iconRS-485 iconRadio frequency iconLoad balancingPhase balancingAdjustableWiFi


NexBlue Zen (Power Sensor) is a practical device that reads the power consumption in real time and will optimize the consumption by dynamically load balancing the input. ZEN supports solar panels so that charging can be done with excess power. It is perfect for situations with and without smart meters and can communicate with NexBlue chargers via Wi-Fi, LAN or Nexus Radio Frequency locally.

This means you can use all available power for EV charging when your home's power consumption is low. This is very practical when you have a small main fuse, or limited capacity if there are many other things in your home that draw a lot of power.

ZEN is available in three different solutions, CT terminals, P1 and HAN plug . The former is mounted on DIN rails in the fuse box and takes 3 modules.

The CT package includes:

ZENSOR
NexBlue Zen current sensor C10 1P MCB / circuit breaker 3-in-1 CT clamps for reading power consumption Antenna

NexBlue Zen is easily mounted in the fuse box. With a simple configuration, NexBlue ZEN communicates with the charging station(s), via Nexus radio frequency, WiFi or LAN. The range of Radio RF is approximately 30-50 meters depending on location and building.

Smart power management

NexBlue ZEN allows charging of the car(s) to occur at the most appropriate time, e.g. when the demand for power for other products in the home/building is low. The radio frequency communication between ZEN and Edge ensures that the automatic dynamic load balancing continues to function if the connection to the cloud is lost or if there is a problem with your wireless network.




According to the Electrical Equipment Regulations, Section 21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by a registered installation company .


Technical details


Function Automatic load balancing between charging boxes and the home / main fuse
Model CS3ANA
Goal H:85.8 x W: 27 x D: 66.8 mm (LxWxD)
Voltage measurement range 85-264VAC
Insulation class II
Nominal power
3W
Overvoltage category OVC II
Assembly DIN rail (3 modules)
Current measurement range CT terminals (included): ± 0 – 80 A (Max cable cross-section: 16 mm²)
Rogowski coil (optional): ±0 - 1500 A
Connections Power terminal / solar panel terminal
RS-485: TIA/EIA-485A
LAN: ISO/IEEE 802.3u (RJ45)
Wi-Fi antenna
Power supply terminal
Power supply Via mains power (10A circuit breaker)
Wireless connection Wi-Fi: 2.4GHz 802.11b/g/n
Bluetooth: BLE 4.2
Nexus Radio Frequency: (range of 30-50 meters depending on conditions)
Operating temperature -25°C to +55°C
IP rating IP30
Relative humidity 0 - 90%
Height (installation) <2000m
Color Gray
Weight 95 grams
Standards and approval EU Type Examination Certificate (Module B)
Radio Equipment Directive 2014/53/EU
Article 3.1.a: Health and Safety
Article 3.1.b: EMC
Article 3.2: Effectively uses and efficient use of radio spectrum
CE
Warranty 5 years


Questions and answers


AMS meters in Norway

Does Equalizer fit all AMS electricity meters in Norway?
Yes, it fits all Norwegian AMS electricity meters.


Warranty


We are proud of our products and it is important to us that you as a customer are satisfied. That is why we provide a 2-year warranty on most of our products, with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that the product will function as expected throughout the warranty period (this is in addition to your rights under the Consumer Purchase Act). Read more about the warranty in our purchase conditions .


NexBlue ZEN - Current Sensor - Dynamisk lastbalansering - Load balancer - Elbilgrossisten

NexBlue ZEN — Dynamic load control / balancing of main fuse

1.995 kr