- Home
- Easee Home Charging Unit (Charge Berry) - 22kW - 32A/1+3 phase - Type 2 socket
Note! Can only be installed by a registered installation company.
Receive up to 35% in subsidies from Enova when purchasing an Easee charging box, Easee Equalizer, and Installation.
- Product Information
- Questions and Answers
- Documentation
- Warranty
Product Information
- Easee Charge charging unit- Charging unit only (Charge berry)
- Simply clicks onto the back plate
- Meant for home charging and smaller charging facility (max 3 pcs per course)
- Supports all power grids (IT, 230V/1+3-Phase, TT and TN 400V) and all amperage (6-32A)
- 5 years warranty- Safe and secure
Freedom to choose a color
The charging station is delivered in 5 different colors so that you have the freedom to choose which charging box will match your car or house.
Charging unit/ Charge Berry
This patented 3- part installation- with its unique back plate, charge berry (the charging unit itself), and front cover, makes installation extremely easy and quick. It's a breeze to connect one or more charging stations. The electrician, first, installs the back plate onto the wall, connects the power conductors, and then "clicks" the charge berry/ charging unit in place on the back plate. This saves- not only the electrician's time and frustration, but your own money. This unique installation makes it possible for you to install the charging unit and exchange it afterwards if, contrary to conjecture, it were to become defective. This minimizes downtime and allows you to, again, continue charging as normal.
According to regulations on electrical equipment §21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by an authorized and registered installation company installasjonsvirksomhet.
Technical Descriptions
Technical Details
Charging Connector | Type 2 contact, female (IEC 62196-1/2) |
---|---|
Charging Mode | Mode 3 |
Number of Phases | 1 / 3 |
Power Supply | 6-32A |
Power Grid |
IT (230V) and TN (400V) (automatic detection) |
Charging Current | Wireless (1A) adjustments between 6A-32A (1,4 - 22 kW) |
Operating Voltage | 230V - 400 VAC |
Frequency | 50-60 hz |
Power Consumption | <1 W stand-by |
Automatic Fuse | 3x32A, type C |
Earth Fault Protection | Built-in electronic earth fault protection A (30mA) + 6mA DC-RCM / RDC-PD (IEC 62955: 4.1.1.4) |
Operating Temperature | -30°C to +50°C |
Authorization | RFID/NFC, 13,56 Mhz / Application |
WiFi | 802.11 b/g/n (2,4 GHz) |
Telecommunication | e-SIM - 4G/GPRS |
Communications Protocols | Bluetooth Low Energy (BLE 4.1), WiFi, RFID/NFC and OCPP 1.6 |
Third Party Integration Alternatives | OCPP 1.6 and API |
Functions | Load balancing- up to 3 charging boxes. Support for wireless load balancing of the main fuse. Energy measurement soft start. |
Sensor | Pressure sensor- manual adjustments of charging strength and adjustment of smart charging . Light sensor- automatic adjustment of LED brightness |
Energy Control | Prepared for smart house |
Energy Meter | Integrated energy meter in the charging station with +/- 5% accuracy of current and voltage |
Theft Protection | Electronics (charging unit/ charge berry) can be deactivated and tracked in the event of theft. The electronics can be locked to the backplate with a hidden padlock. The charging cable can also be locked to a type 2 connector. |
Software Updates | Automatic downloads (included) |
Protection Class | IP54 |
Fire Protection | UL94 |
Impact Resistance | IK10 |
UV-Protection | UV Resistant |
Insulation Class | II (4kV AC and 6kV impulse, isolation) |
Overvoltage Class | >III (4kV) |
Measurements | 194 x 256 x 106 mm |
Weight | 1,5 kg |
Standards and Approval | IEC 61851-1 and IEC 61851-22 Radio Equipment Directive 2014/ 53/EU ROHS directive 2011 /65/EU CE |
Warranty | 5 years |
Questions and Answers
WiFi- interface
How do I get access to the WiFi- interface?
1) Connect your phone to the charging robot's shared wifi- network. If your phone does not find shared Wifi- networks, hold down the touch button for 5 seconds. Turn off and on the power of the charging robot to access the installation menu, if the Wifi- network for installation is not available.
2) Type 192.168.4.1 in the search engine.
3) Log in by using the pin found on the charging robot/ electrical device.
If you don't get in, try another phone. On some phones, Wifi+ must also be switched off.
Why do I only get the user menu with two choices when I connect to th WiFi- interface?
Turn the power to the charging robot on and off again to gain access to the installation menu.
Note* There may be differences between the Wifi- interface and what you see in the user and installation guide- as new functionality will continually be implemented.
How do I connect the charging robot to my local WiFi- network? You will need to connect to where there is 4G first and then update your software- If you have older software.
Installation
Is it safe to have the cable entry on the top of the charging robot and can it be left outdoors?
Yes, the product is developed for the cable to enter in from the top. It has been taken into account that water can get in if the gaskets do not seal completely against the cable.
Is it allowed to have several charging stations on the same course?
Yes, as long as the load management is included in the charging equipment (such as in the charging robot from Easee), it is permitted to connect several chargers to the same fuse. This is explained in more detail in NEK400 (NEK400:2018) found in paragraph 722.302 and in paragraph 722.533.101.
Will other pre-connected protections affect the charging station's functionality?
No, it is recommended that an external earth fault protection type A is installed on the charging course in accordance with current regulations. The protection in the charger will not be affected by or affect the function of other external protections.
It is not technically problematic with a pre-connected earth fault protection type B. The only thing that theoretically can happen is if B protection in the cabinet can loosen
The built-in protector in the charger is electronic and turns off the power to the electric car if it measures a DC- power leakage of 4-6mA and/if an AC power leakage of 20-30mA. This should, therefore, provide a certain selectivity in the system, so that any external A protection is not normally triggered by an earth fault (AC and/or DC). The electronic protection in the charger restarts simply by plugging the charging cable in and out of the electric car's charging connector.
Access control, Availability, and Security
Can I lock my charging robot so that it is unavailable for another's usage?
Yes, by holding in the touch button for 5 seconds you will access a local user interface. Either deactivate the point of charging or activate the RFID access control feature.
Can I lock the Type 2 cable permanently in my charging robot?
Yes, this can be done via the local user interface.
I can't unplug my charging cable. What do I do?
Push/press the connector in, then try taking in and out the charging cable from the electric car. Alternatively, you can open/close the lock via the user menu (hold the button for 5 seconds until you hear a confirmation tone to activate it).
Load Balancing
Can the charging robot dynamically load balance with my house so that I avoid blowing my main fuse? Yes, however, it requires external hardware which can connect to your power meter. We will develop and complete this product in Q2 2020.
Warranty
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.
Related Products
SKU: ECL11S
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: Easee
Product Information Product Information Universal charging station compatible with all electric cars Developed and manufactured in Norway — designed to withstand the Nordic climate, including rain, snow, humidity, and frost Supports all electrical grids (IT, 230V/1+3-phase, TT, and TN 400V)...
5.036 kr eks. mva.
SKU: 603402
AVAILABILITY: In stock
PRODUCT TYPE: Plug holder
VENDOR: Intramco
Product Information Product Information Fits charging cables with type 2 plug to car Angled connector that makes it more convenient to use with the option to move the cable around Practical storage of the charging plug when not in use...
239 kr eks. mva.
SKU: 132115
AVAILABILITY: In stock
PRODUCT TYPE: Type 2 to Type 1
VENDOR: EBG
Product Information Product Information One of the lightest cables on the market thanks to high-quality materials Double lock system- supports auto lock and a secondary (padlock) charging system for theft protection Enables mode 3 charging- Used against the charging station...
2.078 kr eks. mva.
SKU: 132325
AVAILABILITY: In stock
PRODUCT TYPE: Type 2 to Type 2
VENDOR: EBG
Product Information Product Information One of the lightest cables on the market thanks to high-quality materials Screw less design on the plug Flame retardant, pressure resistant, durable, impact resistant and oil resistant Rubberized plugs- providing a good grip Very soft...
1.599 kr eks. mva.
SKU: 132125
AVAILABILITY: In stock
PRODUCT TYPE: Type 2 to Type 2
VENDOR: EBG
Product Information Product Information One of the lightest cables on the market thanks to high-quality materials Drainage hole at the bottom of the plug- preventing it from freezing Patterned handle- providing a better grip while in use Very soft and...
1.599 kr eks. mva.