Rheidon Tech — Schuko to type 2 — adjustable charging cable 6/10/13/16A — 1-phase — 3.6 kW

The Rheidon Tech charging cable comes with the following:

1. Charging cable - Schuko to type 2 plug
2. Exclusive travel bag / travel carrier
3. Holder for ICCB / control unit
4. Padlock
5. User manual

Large LCD display Large LCD display shows settings such as real-time data, current, voltage, charging time and set charging power. It is also possible to set the charging time (1-12 hours).	Exclusive travel bag The charging cable comes with an exclusive travel bag / storage, which makes it stylish to have in the car. Alternatively, the bag can be used as a small gym bag or similar.
Integrated hook and robust The cable has an integrated hook that makes it easy to relieve the schuko plug. The control unit is very robust and water resistant (IP65). Operation and adjustment of the current is easy with integrated buttons on the unit.	Newly developed plug and soft cable The charging cable is supplied with a 6 meter usable length and is therefore suitable for all electric vehicles. Likewise, the rubber cable is very mechanically durable and flexible in cold environments. The plug is comfortable to use and has low contact resistance.

LCD display
The screen provides lots of useful information and shows real-time data and status about:

• Temperature in control unit - integrated overheating protection
• Real-time amps when charging
• The effect with which it charges
• Charging process status
• Voltage (volts) in the power grid
• Number of kWh supplied to the battery since connection
• Charging time - timer that shows how long the charging cable has been connected
  

Adjusting the current strength
Easily done by pressing the buttons in the middle of the control unit which can switch between steps 6A/10A/13A/16A. This is useful for cars that do not have this option via the car or charging on smaller circuits.

Security
The charging cable ensures safety during charging and terminates charging within 30ms in the event of overvoltage or ground fault detection. With a built-in type A 30mA AC and DC-RCM / DC filter of 6mA DC, it protects against all types of ground faults. Both the control unit and the charging plug have temperature sensors to prevent overheating. LED diodes indicate charging errors to protect both the product and the user in the event of any errors.

The charging cable is designed according to IEC 62196 and IEC 61851-1 and meets all safety requirements.

Not sure if this product fits your electric car or plug-in hybrid? Our charging guide will help you find which charging cable you need.