SPARK Red 32 PRO — Red CEE for type 2 — adjustable charging cable 6A-32A — 32A / 3-phase — 22 kW

SPARK Red 32 PRO charging cable comes with a red CEE 32A 3 phase 400V 5-pin industrial plug (432-6), and type 2 plug towards the car which gives the possibility of charging with up to 22kW. The charging cable is either 7.5 meters long and combines ease of use with high safety. The charging cable has a solid control box and provides a maximum of 22kW. The charging cable has total earth fault protection via 30mA AC and 6mA RCD-DD, which means that it can be safely connected to all dedicated power circuits. The control electronics (EVSE) performs self-diagnosis when it is connected to the power grid and will display an error code via flashing LED lights. The self-diagnosis includes:

• Continuous monitoring of the wiring between the power grid and the EVSE
• Continuous monitoring of the wiring between the EVSE and the vehicle
• Continuous monitoring for ground faults and off-voltage
  • In the event of overvoltage or ground fault detection , the vehicle is disconnected within 40 ms
• RCD type A 30mA AC + 6mA RDC-DD
• Continuous monitoring of switching elements
• Integrated overheating protection with temperature sensors

The charging cable is designed according to IEC 62196 and IEC 61851-1 and meets all safety requirements.

Adjusting the current strength
SPARK Red 32 PRO can adjust the current between 6A/10A/13A/16A/20A/25A/32A steps. This is useful for cars that do not have this option via the car.

Versatile
SPARK Red 32 PRO can be used on several types of industrial connectors using cable adapters / transitions. These can be found here. Suitable red industrial wall socket can be purchased here.

Instructions for use can be found under the "Questions and Answers" tab.