- Product Information
- Technical Descriptions
- Questions and Answers
- Adjustable charging cable between 6A/8A/10A/13A/16A with type 2 plug
- 16A Red CEE plug (416-6) and 7,5 meter quality cable
- Very small control box- low weight
- Top security- built-in earth fault circuit breaker and DC-filter 6mA (RDC-DD)
SPARK Red 16 charging cable is supplied with red CEE 16A/ 3-phase 400V 5-pole industrial plug (416-6) and type 2 plug for the car. This gives the possibility of charging with up to 11kW. The charging cable combines ease of use with top class security. It fits perfectly with access to a 16A red industrial contact and is 7,5 meters long in length.
The charging cable has one of the market's smallest control boxes with 11kW output. It has a full DC- protection via a DC-filter of 6mA which means that it can be safely connected to all dedicated current courses. The control electronics (EVSE) performs a self-diagnosis when it is connected to the mains and will display an error code via a flashing LED light. The self-diagnosis includes:
- Continuous monitoring of the cables between the power grid and EVSE
- Continuous monitoring of the cables between EVSE and vehicle
- Continuous monitoring for earth faults and of the voltage
- In the event of an overvoltage or detection of an earth fault, the vehicle is disconnected within 40ms
- Earth fault circuit breaker type A m/ DC-filter 6mA
- Continuous monitoring of coupling elements
- Integrated protection against overheating
The charging cable is designed according to IEC 62196 and IEC 61851-1 and meets all safety requirements
Adjusting the Amperage
SPARK Red Mini can adjust the amperage between steps 6A/8A/10A/13A/16A. The adjusting is made easily via a button with an LED-diode that shows which step it is on. This is useful for cars that do not have this option via the car.
SPARK Red Mini can be used on several types of industrial connectors by means of cable adapters/ transition. You can find these here. (her.) Matching red industrial socket on the wall can be purchased here. (her.)
ATTENTION! There is a difference between 16A and 32A plugs and connectors and they are not interchangeable. Feel free to read more about industrial plugs/ industrial connectors in our charging guide. (industriplugger / industrikontakter)
Instructions for use can be found under the "Questions and Answers" tab.
||7,5 / 10 meters|
|Number of Phases||1 / 3|
||adjustable between 6A/8A/10A/13A/16A|
||230V / 400V|
||Red CEE 16A 5-pole (416-6)|
|Cable||5x2,5mm² + 0,75mm²|
||Type 2 (IEC 62196)|
|Earth Fault Protection
||Type A m/ DC-filter 6mA - DC-RCM - protection according to NEK400:2018|
|Measurements of Control Unit
||5cm x 8cm x 19cm (HxWxL)|
|Operating Temperature||-30°C to 50°C|
|Protection Class||IP65 on the control box and IP44 connected to the car|
|Certifications||IEC 62196, IEC 61851-1, CE, EMV, RoHS|
Questions and Answers
Does the charging cable fit the 16A or 32A red industrial connector?
It only fits the 16A red industrial connector as 32A is too large.
Can the charging current be adjusted?
Yes, this is easily done via the one button found at the bottom of the control box.
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.