- Product Information
- Technical Descriptions
- Questions and Answers
- Steel Foundation with CombiCoat® for long-lasting usage
- Long-lasting- hot-dipped and two stage powder coating
- To heights — 750 and 1000 mm
- C/C bolts of 160 mm
Steel foundation from VIKØrsta is delivered Combi-Coat®-treated (hot-dipped, galvanized) in accordance with the National Road Administration's recommendations in Hand book R310 point 5.3.6. The foundation has two sided cable entry with optional cable entry height, slot width 76mm. It is possible to connect a ø110 draw pipe using a draw pipe sleeve. The bolts are replaceable and the mast footplate will cover the foundation top.
VIKØrsta Steel foundations are very lightweight compared to concrete foundations and can be set into the ground by hand, resulting in low shipping costs. They require less adjustment when lowering the height with the adjustment options found on the mast of the foundation. If the foundations are in unstable filling, the masts can later be straightened by adjusting the nuts above and below the base plate, which saves you expensive excavation.
There are no need for adapter plates as the steel foundations fit all of our charging posts/ pillars.
Tightening Torque After the post has been mounted on the foundation, the nuts must be tightened with a tightening torque of at least 200Nm.
||750 or 1000mm|
|Weight||18kgs (750 mm)
26 kg (1000 mm)
Questions and Answers
Frequently asked questions are listed here.
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.