- Product Information
- Technical Details
- Questions and Answers
- TFXP installation cable (double insulated) for fixed installation
- Suitable for both indoor and outdoor usage- cable can be laid directly on the ground without pipes
- The installation cable is well suited for use on cable bridges or laid in ducts and pipes
- Price per meter
TFXP installation cable for low-voltage systems (230V/ 400V) which is suitable for fixed installation on cable bridges, ducts and in pipes or isolated in a wall without extra protection. The cable can be installed outdoors directly on a wall and directly into the ground. The cable is multi-wired that is double-insulated with separate earth conductors. The cable is UV- resistant, oil and chemical resistant, and protected against water penetration. This product is a further development and improvement of PFXP.
Higher operating temperature, which also allows for higher load with the same conductor cross-section. TFXP MR is also suitable for electric car charging stations, awnings, heat pumps, stoves, extension cables, and use at dock facilities.
See load table referring to installation types A2, B2, C, D2 and E. It is flexible and easier to handle and install. The cable is double insulated and can be installed in the wall, laid in a cable trench outdoors, such as when connecting to outdoor cabinet or enclosure according to NEK 399
According to regulations on electrical equipment §13, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by an authorized and registered installation company installasjonsvirksomhet.
|Number of Conductors||3P + N + PE (5G10mm²)|
|Conductor Marking||Brown, black, grey, blue+ yellow/green (PE)
|Type of Conductor||Multi-stranded, round copper/ Kl.5= multi-stranded|
|Voltage||600V / 1000V
|Outer Diameter||Ø17,2 mm
|Color of Cable/ Outer Sleeve||Black, lead-free, UV-resistant PVC (Poyvinyl Chloride)|
|Isolation||Double insulated, lead-free PVC|
|Maximum Operating Temperature||90°C|
|Minimum Handling Temperature||-30°C
|Conductor Resistance DC max. +20°C||3,08 ohm/km|
|Weight||603,3g pr. meter|
|Fire Class acc. EN 13501-6||ECA
|Flame Resistant||After EN 60332-1-2
|Sales Packaging||Per meter|
|Installation||Pulled into pipes/ directly on the wall|
|Produced||NEK KABEL AS|
|Standard||CENELEC HD 21.4 S2; NEK IEC 60332-1/ EN50265|
Questions and Answers
What type of cable is this?
This is an installation cable for your electric car which should be installed directly into the charging box.
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions. kjøpsbetingelser.