Out stock

Wallbox Duo AdSpace — 2x 22 kW — 32A/3-phase— 2x Type 2 contact



VENDOR: Enelion

23.499 kr
18.799 kr eks. mva.
Gladengveien 18, 0661 Oslo
1-3 Working days by post

Note! Can only be installed by a registered installation company.
Only 1.000 kr away from free shipping

Product Information

  • RFID-card reader- Choice of RFID user access or Plug and Charge
  • Double (2x) type 2 socket/ outlet with possibility of load balancing- perfect households with two electric vehicles
  • Supports up to 2x 32A/400V (total 44 kW)
  • Housing made in anodized aluminum- Unique design that is durable and rust-free


Type 2 støpsel Mode 3 lading 400V 3-fas 230V 1-fas 32A Lastbalansering Justerbar RFID kortleser


Wallbox Duo AdSpace is supplied with a double type 2 connector and has a robust construction made of adonized aluminum. It is delivered in the color graphite black. The front panel is black and is made of scratch-resistant plexiglass. The OLED screen provides informative feedback regarding the charging process. The charging status is displayed via LED lights around each of the type 2 connectors so that it is easy to see the status.

Simple Installation
Wallbox Single can be connected to the mains either from above or below the charging station. This gives flexibility during installation and also makes it easier for electricians to install and lower installation costs.

High Charging Power
AdSpace supports 2stk 3x32A supply cable which makes it possible to get 2x22 kW charging power on both type 2 sockets/ outlets at the same time. This is practical when you want to offer fast charging in a shopping center, at your workplace, for guests or the like.

Dynamic Load Balancing
Wallbox Duo AdSpace can also be supplied with dynamic  load balancing (DLB) when connecting one power supply cable, which ensures the utilization of all available capacity on the current course when charging:

    • If one vehicle is charging, that vehicle gets all available power
    • If two vehicles are charging, the power on both vehicles is shared by the maximum current draw at the charging station
    • When one of the cars starts to get full and draws less power, the other car will automatically get more power, but not exceed the maximum set curent.

    The charging station can also be set to lower amperes and distribute, for example, a 20A current course to 2x10A current course to 2x10A when both are in use. AdSpace also supports 1-phase and can thus be used on all power grids and power courses. Note that this must be activated as the charging station has the option of 2x22 kW.

    User Access
    RFID-card reader is standard and activation of the charging is done via the included 2 RFID cards (standard configuration). This means that the charging station fits in the workplace, in a housing association or at home. The charging station can also be configured open to everyone, so-called "Plug and Charge", which means that one does not need RFID to start charging and only needs to connect and charging will automatically start.



    According to regulations on electrical equipment §21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by an authorized and registered installation company installasjonsvirksomhet.


    Technical Details

    Charging Contact
    2x Type 2 contact (IEC 62196-1/2)
    Charging Mode
    Mode 3
    Number of Phases 1 / 3
    Power Supply
    up to 2x av 3x32A (Nipple for up to 5x6mm²)
    Power Grid
    IT (230V) and TN (400V)
    Charging Current
    stepless adjustment between 6A-32A (1,3-22 kW)
    Operating Voltage
    50-60 hz
    Power Consumption
    < 1w idle
    OLED-Resolution 128x64 px
    Automatic Fuse
    3x32A, type C
    Earth Fault Protection
    built-in earth fault protection type A
    Operating Temperature
    -20°C to +50°C
    Authorization RFID/NFC, 13,56 Mhz / application
    Communications Protocols
    GSM 2G (Online version)
    Ethernet (Online version)
    WiFi (802.11n) (Online version)
    load balancing 2x NRG power meter
    OCCP 1.6 (Online version)
    Power Measurement
    option for current meter (MID current meter)
    IK-Class IK9 (EN 60068-2-75)
    Protection Class
    Measurements 100 x 24,9 x 15,6 cm
    5 kg
    2 years


    Questions and Answers




    We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods.  Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.


    Wallbox Duo AdSpace — 2x 22 kW — 32A/3-phase— 2x Type 2 contact

    Wallbox Duo AdSpace — 2x 22 kW — 32A/3-phase— 2x Type 2 contact

    23.499 kr