- Product Information
- Technical Details
- Questions and Answers
- Zaptec Sense gives automatic dynamic load balancing of the Zaptec GO main fuse
- Charge with up to 32A when power usage is low in the building.
- Adapt charging of the electric car(s) according to the power tariff
- Communicates with the charging station(s) vie WiFi
- Simply attaches into the fuse box with its built-in magnets
- Monitor electricity consumption in the home/building through the Zaptec App
- Connects easily to HAN port on your AMS meter.
With Zaptec Sense, you get even more power to your electric car charging than you would otherwise. This way you can charge faster and charge multiple cars at once without blowing the fuse- automatically. This means that you can use all available electricity to your electric car charging when the power consumption in the house is low. This is extremely practical when you have a small main fuse, or limited capacity if there are other products/ devices in the building that draw a lot of electricity.
What does Zaptec Sense solve?
If you have little electricity available in your home, you may risk blowing the fuse. In order to avoid a power outage, the electrician will reduce the power. This ensures the fuse does not blow while charging your electric car, but at the same time you do not use the available current. With Zaptec Sense, you will have the opportunity to utilize all available power in the house. This means faster and safer charging.
What is a HAN port?
Home Area Network (HAN) is a separate physical output (port) on your new automatic power meter (AMS-meter) in your fuse box. On these power meters, there is a so-called HAN port which you can activate if the network company has enabled it. This port can give you detailed information about your power consumption. The Easee Equalizer is compatible with all new AMS power meters in Norway with a HAN port.
Where can I find the HAN port on the various smart meters?
There are mainly three different AMS/ Smart meters that are used in Norway. Below we have marked (red ring) where the HAN port is normally found on these three different models. Note that these different models and power meter images may differ from the exact model you may have.
According to regulations on electrical equipment §21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by authorized and registered installation company installasjonsvirksomhet.
|Function||Automatic load balancing between charging station and building/ main fuse|
|Measurements||58,4 x 58,6 x 25,1 mm (LxWxD)|
|Cable Length||1,5 meters|
|Connection||WiFi - HAN port (Home Area Network)|
|Power Supply||Via HAN port|
|Wireless Connection||Wi-Fi (IEEE 802.11b/g/n (2,4 HGz) / BLT (Bluetooth V4.2 (BLE)|
|Standards and Approval||Radio Equipment Directive 2014/ 53/EU
ROHS directive 2011 /65/EU
Questions and Answers
AMS meters in Norway
Is the Zaptec Sense suitable for all AMS power meters in Norway?
Yes, it is suitable for all Norwegian AMS power meters.
|FDV-dokumentasjon (forvaltning, drift og vedlikehold)|
|Declaration of Conformity - CE|
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions. kjøpsbetingelser.